17
-EN
RCA INPUT
ANALOG 1
Ai-NET IN
ANALOG2
CHANGER IN
ANALOG3
CD
DIGITAL1
CHANGER
DIGITAL2
DVD
DIGITAL3
DISPLAY
INPUT
(L)
(R)
FUSE
15A
BATTERY
POWER SUPPLY
GND
CENTER
GUIDE INPUT
SUBWOOFER
REAR
FRONT LOW
FRONT MID
FRONT HIGH
OUTPUT
(L)
(R)
Battery
NAVIGATION
INPUT
REMOTE INPUT
VIDEO OUTPUT
RGB
RGB OUTPUT
GUIDE OUTPUT
NTSC VIDEO
OUTPUT
NTSC
Output Side
RCA
connection
cable
To
Video
Input
Jack
RGB Cable
(Sold Separately)
Remote
Control
Output
Cable
Remote Control
Input Cable
Video Output Cable
Remote OUT Cable
Remote ON Cable
Illumination Cable
Guide Control Cable 2
★★★
Guide Control Cable 1
Yellow
Ai-NET
Output
To the vehicle's small light cable
Not used in this system
Not used
Ai-NET Cable
(Included with DVD player)
Ai-NET
Input
Ai-NET Compatible
CD Changer
DVD Player
Navigation
KCE-900E
(Sold Separately)
CDA-7990R
Head Unit
Fiber Optic Cable (Sold Separately)
Fiber Optic Cable (Included with DVD Player)
TV Monitor
(TME-M790 etc.)
★★
To External Amplifier Remote ON Cable
Connect to a metal part of
chassis body with a screw.
Ground Cable (Sold Separately)
Battery Power Cable (Sold Separately)
Blue/White
Blue
Orange
White/green
White/Green
Black
White/Brown
White/Brown
Front Tweeter Output (L)
Front Tweeter Output (R)
Front Mid Range Output (L)
Front Mid Range Output (R)
Front Mid Bass Output (L)
Front Mid Bass Output (R)
Rear Output (L)
Rear Output (R)
Subwoofer Output (L)
Subwoofer Output (R)
Center Output
To External Amplifier
RCA connection cable
Ai-NET Cable
(Included with CD Changer)
Fiber Optic Cable
(Sold Separately)
Ai-NET Cable (Included)
Guide Control Cable
White/Green
Input Side
★
Gray
NOTES
★
When connecting a Optical Digital CD
Changer
★★
When connecting a Optical
Digital CD Changer, change
the Digital/Analog switch of
the CD Changer to “2”
(Digital Output)
★★★
For the guide control cable, use guide
control cable 1. Do not use guide control
cable 2.
1
2
• PXA-H900 + CDA-7990R Head Unit + DVD CD C
Navigation TV M External Amplifier
NOTES
•
For the ground cord (sold separately) and battery power cord (sold sepa-
rately), pass the wires through the included terminal board cover before
connecting them to the PXA-H900. After this, mount the terminal board cover
on the PXA-H900.
•
If the ground cord (sold separately) and battery power cord (sold separately)
are only wires (if they do not have terminals), refer to “Installing with wires
only (no terminals)” (page 18) to install.
Please observe the following when using Fiber Optic Cable.
•
Do not coil the Fiber Optic Cable smaller than a 30mm radius.
•
Do not place anything on top of the Fiber Optic Cable.
