Alpine INE-W987HD, Руководство пользователя

Страница: 133 / 260

Jeep Wrangler
X409-WRA-JL 20200825v1
˜
27/29
Setting Up OEM Aux Switches
1
Once in the setup menu (see page 28) select SYSTEM and then MAESTRO MODULE.
2
Select VEHICLE FEATURES.
3
Select AUX SWITCHES.
4
Select the switch that you would like to edit (AUX 1, AUX 2, AUX 3, or AUX 4).
5
Select the setting you would like to edit (TYPE, POWER SOURCE, or RECALL LAST STATE).
6
TYPE can be set for either LATCHING or MOMENTARY. LATCHING means that when the switch is selected it
will stay on until the switch is pressed again. MOMENTARY will only keep the switch on as long as the button
is held in.
7
RECALL LAST STATE when set to ON the state of the switch is retained across ignition cycles.
8
POWER SOURCE menu can be set for either BATTERY or IGNITION. BATTERY means the switch has power to
it at all times. IGNITION means it has power only when the vehicle is on.
1 2
3 4
5 6
7 8