Alpine INE-W987A, Руководство пользователя

Страница: 94 / 105

94
-EN
1
Clean the mounting location.
2
Put on the GPS Antenna mounting plate.
3
Mount the GPS Antenna.
• Do not mount the GPS Antenna inside the centre console.
- Mount the GPS Antenna on a flat plane of the dash board or rear
tray.
- Make sure the GPS Antenna is not covered (obstructed) by any
metallic surface or object.
• If the GPS Antenna is mounted near the unit, the reception becomes
poor, and the location of your vehicle may not be displayed correctly.
- Mount the GPS Antenna far away enough from the unit.
- Bundle the GPS Antenna cable away from the rear of the unit.
• Some thermal reflection type or thermal absorption type glass may
interrupt high frequency waves. If reception is poor with the antenna
installed inside the car, try to mount the antenna outside the car.
For safe use, make sure of the following:
• Location is stable and firm.
• Driver’s view and operations are not obstructed.
• Microphone is located where the driver’s voice can be easily
picked up (for example, on the sun visor).
When you speak into the microphone, you should not have to change
your driving posture. This may cause a distraction, taking your
attention away from safely driving your vehicle. Carefully consider
direction and distance while mounting the microphone. Confirm that
the driver’s voice can be easily picked up at the selected location.
1
Mount the original mounting bracket to the unit using
the supplied screws.
* To securely connect the ground lead, use an already installed screw on a
metal part of the vehicle (marked (
)) or a clean, bare metal spot on the
vehicle’s chassis.
2
Connect all other leads of the unit according to details
described in the “Connections” (page 95).
3
Mounting the unit in a car.
• Fix the cables carefully. Do not damage them by tucking them into
movable parts, such as a seat rail, or by locating them against sharp or
pointed edges.
When using HDMI connection cables, secure the cables to the HDMI
Terminals with the supplied HDMI Fixation Bracket.
1
Slide the HDMI Fixation Bracket into the grooves (A).
2
Secure it with the screw (B).
Mounting the GPS Antenna inside the vehicle
Mounting the Microphone.
Antenna mounting plate
GPS Antenna
This unit
Microphone
Cable clamp
(Sold separately)
Installation example using the Original
Mounting Bracket
Note on using HDMI Connection Cables
Ground Lead*
Chassis
Screws (M5 × 8) (Included)
Original Mounting Bracket
Face plate (Included)
HDMI Terminal
(A)
(B)
HDMI Fixation Bracket
(Included)
(A)