Alpine iLX-507E, Руководство пользователя

Страница: 64 / 80

ALPINE iLX-F509E 68-41657Z84-A (EN) ALPINE iLX-F509E 68-41657Z84-A (EN)
64
-EN
Caution concerning the installation
location
Angle of installation
Install at an angle between horizontal and 30°. Note that
installing at an angle outside of this range will result in a
loss of performance and possibly damage.
■
iLX-507E
0 - 30°
■
iLX-F509E/iLX-F511E
0 - 30°
Mounting the Microphone
For safe use, make sure of the following:
• Location is stable and firm.
• Does not interfere with safety equipment.
•
Driver’s view and operations are not obstructed.
•
Microphone is located where the driver’s voice can be
easily picked up.
When you speak into the microphone, you should not have
to change your driving posture. This may cause a
distraction, taking your attention away from safely driving
your vehicle. Carefully consider direction and distance while
mounting the microphone. Confirm that the driver’s voice
can be easily picked up at the selected location.
Microphone
Steering column
Microphone base
Adhesive tape
Mounting the GPS Antenna inside the
vehicle
1
Clean the mounting location.
2
Put on the GPS Antenna mounting plate.
3
Mount the GPS Antenna.
GPS Antenna
Antenna mounting plate
This unit
• Do not mount the GPS Antenna inside the centre console.
– Mount the GPS Antenna on a flat plane of the dash board
or rear tray.
–
Make sure the GPS Antenna is not covered (obstructed) by
any metallic surface or object.
• If the GPS Antenna is mounted near the unit, the reception
becomes poor, and the location of your vehicle may not be
displayed correctly.
–
Mount the GPS Antenna far away enough from the unit.
– Bundle the GPS Antenna cable away from the rear of the
unit.
• Some thermal reflection type or thermal absorption type glass
may interrupt high frequency waves. If reception is poor with
the antenna installed inside the car, try to mount the antenna
outside the car.
Note on using HDMI Connection
Cables
When using HDMI connection cables, secure the cables to
the HDMI Terminals with the supplied HDMI Fixation
Bracket.
Secure the HDMI Fixation Bracket with the screw
(A).
HDMI Terminal
HDMI Fixation Bracket
(Included)
(A)
djustment and Mounting
isplay
-F511E only)
’s Display can be adjusted
When mounting the Display, confirm the
ting dimensions so that it
t your field of vision or impair driving.
ARNING
ollowing cases, the display cannot be
.
ation of the steering wheel or various
t, windshield wiper switch, turn
ch, etc.)
ation of the airbag
tly impairs operation of the hazard
tification or operation of any other
ol switches
onfirmation of gauges or warning
tors
feres with vehicle equipment (switches,
, etc.)
ehicle, the glove compartment or
y become inaccessible, or air
entilation ducts may be covered.
y mounting dimensions and adjustable
osition
d position>
51.5 mm 31.5 mm
<Back position>
isplay angle
45°
-20°
0°