22
-EN
The file selected in the User mode will be copied according to the
following procedure.
1
Connect the USB memory device which contains the
BMP file to be copied to the unit.
2
After the confirmation message is displayed, touch
[OK]
.
The Opening image is changed.
Copiable image files
About iLX-007E
Touch
[About]
on the General setup menu in step 3. Refer to “General
You can view the model name, serial number and version information of
this product. Make note of the version information and refer to it
whenever you contact Alpine Tech Support or an Alpine-authorized
dealer.
Contents: iLX-007E (model name) / Serial Number / Firmware
Version
You can initialize all data, to restore the factory settings. Remove the
USB Flash memory, from the system before operation.
Setting item: Clear All Settings
1
Touch
[RESET]
of “Clear All Settings”.
2
After the confirmation message appears, touch
[OK]
.
The system starts initialization.
•
Do not turn on/off the power, change the ignition key position or
remove the screen panel until system restart is completed.
Demonstration Setup
This unit has a Demonstration feature for the display. When you install
and use the unit for the first time, the unit will enter demo mode
automatically. To quit demo mode, turn off the Demo mode.
Setting item: Demo mode
Setting contents: OFF / ON (Initial setting)
•
If you perform an operation during the Demo mode, the
demonstration is temporarily stopped.
Application Setup Operation
1
Touch
[
]
on the Home screen.
The Setup main screen is displayed.
2
Touch
[Application]
.
The Application Setup screen appears.
3
Select the desired item.
If “ ” appears, there is another hierarchy level. Touch the
desired item.
If “ ” does not appear, proceed to step 4.
Setting items: Camera / Auxiliary (AUX) / Apple CarPlay
4
Touch
[
]
or
[
]
etc., to change its setting.
5
Touch
[
]
to return to the main application screen.
Touch
[ ]
to return to the previous screen.
•
Immediately after changing the Application Setup (while the system
is writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
File format:
BMP
Image size:
800 × 480 pixels, RGB 24 bit or less
Folder Name:
OPENINGFILE
File Name:
openingfile.bmp
Displaying the Product Information
Initializing the System
Canceling the Demonstration
Application Setup
The parking brake must be engaged to access the Application
Setup screen. Attempting to access this screen while driving will
display the warning-Unable to operate while driving.
The following steps 1 to 5 are common operations to each
“Setting item” of Application Setup. Refer to each section for
details.
Содержание iLX-007E
Страница 2: ......
