83
-EN
01GB07ICS-X8.fm
ALPINE ICS-X8 68-13530Z91-A (EN)
Connection Diagram of SPST Switch (sold separately)
(If the ACC power supply is not available)
•
If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately).
•
The diagram and the fuse amperage shown above are in the case when ICS-X8 is used individually.
•
If the switched power (ignition) lead of the ICS-X8 is connected directly to the positive (+) post of the vehicle
’
s battery, the ICS-X8 draws some
current (several hundred milliamperes) even when its switch is placed in the OFF position, and the battery may be discharged.
ICS-X8
(Red)
(Yellow)
SPST SW (Optional)
FUSE (5A)
(Optional)
FUSE (20A)
(Optional)
Battery
ACC
BATTERY
To prevent external noise from entering the audio system.
•
Locate the unit and route the leads at least 10 cm away from the car harness.
•
Keep the battery power leads as far away from other leads as possible.
•
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
•
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
•
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
01GB00ICS-X8.book Page 83 Wednesday, November 9, 2011 7:39 PM
Содержание ICS-X8
Страница 2: ......