<Cautions for Safe Repair Work>
The following cautions will prevent accidents in the workplace and will ensure safe products.
*The symbols indicate caution is needed to prevent injuries and damage to property.
The symbols and their meanings follow.
*The following symbols indicate two levels of cautions.
When you see this symbol, you have to be very careful.
When you see this symbol, you have to follow the instructions there.
Do not look squarely into the laser light
Fuse Caution
coming from the pickup.
Always use a designated fuse.
You may loose you sight.
Use of an incorrect fuse may result in a fire.
Do not allow wiring to be caught in the
Battery Caution
screw/chassis.
Use the designated battery.
If wiring is caught in the screw/chassis, it may
Confirm the correct polarity and seat of the battery.
cause a short circuit, resulting in a fire.
An incorrect battery or an improperly connected or
seated battery may result in a fire.
High Temperature Caution
Designated Parts Caution
Touching the heat sink may cause severe burns.
Look up the part list and ensure that only
designated parts are used to prevent problems or
accidents.
Reverse Power Supply Connections or
Wiring Caution
Misconnections Caution
Ensure that the wiring is correct when rewiring to
Reverse power supply connections or
prevent problems with ignition/breakdown.
misconnections may cause ignition problems and
smoke may result.
Soldering Caution
Wear Gloves
Hot solder from solder splash may cause severe
Wear gloves to prevent electrical shocks or injury
burns.
from the end face of the metal.
For the FDA laser standard, the following CAUTION label is stuck on each product
Please be careful for repair.
If you ignore this symbol and handle the product incorrectly or unsafely,
injury or only material damage may result.
If you ignore this symbol and handle the product incorrectly or unsafely,
serious injury or death may result.
Warning
Caution
Warning
Caution
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
- 2 -
