55
-EN
1
NAV. transmission indicator
The transmission indicator lights for a few seconds when
the mode selector switch is set to “NAV.”.
2
DTR (DETOUR) Button
Automatically recalculates route if a road block or traffic
congestion is encountered.
3
LIST Button
Displays list of the streets currently set for the route. To
return to the guidance mode, press the DISP button.
4
DEL. DEST. Button
Deletes current destination.
5
OK button
Executes numeral input and starts searching.
6
N/H Button
Toggles between North UP and Heading UP orientation.
7
CANC. Button
Cancels current display screen and switches back to
previous screen with menus.
8
SCALE UP/DN Buttons
9
VOICE Button
Initiates vocal instruction for next route maneuver or
repeats last instruction.
!
MODE Button
Inputs numerals using the numeric keypad, DEL. and +10
buttons.
After pressing the MODE button, the following buttons will
be pressed while the status indicator is blinking: numerals
(0-9), DEL. and +10.
"
MODE Change Switch
Sets this switch to the “NAV.” side to operate a connected
Alpine navigation system.
Operating a separately sold TV monitor
•
To operate a separately sold Alpine TV monitor, press the mode
change switch on the rear of the remote control unit. Operate while
the transmission indicator is blinking.
•
Included remote control unit operation seal: Apply the seal for the
type of TV monitor you are using to the rear of the remote control
unit.
•
Operation may differ or may not be possible for some
products. Also refer to the product’s operating instructions.
(Rear of the Remote Control)
<
Button
Performs playback.
Press and hold for at least 2 seconds for slow motion
playback.
=
BAND Button
Switches the band of Audio or Disc mode.
>
MODE Change Switch
When operating the connected DVD player/DVD changer,
switch to the EXT DVD side.
•
Depending on the disc or playback status, certain operations
may not work. In this case, the
mark is displayed on the
monitor screen.
Operating the Navigation (sold separately)
"
1
9
8
7
6
5
!
4
3
2
