41
-EN
•
With a junction box connected outgoing, incoming, and sending
history will also be recorded in the portable telephone.
•
While telephoning, Time Correction is set to normal (0.0ms) and
DEFEAT is also set to ON. When the call has finished, the unit
returns to the setting which you previously set.
•
The telephone volume can be adjusted from the IVA-D900. The
volume you set during the call is memorized, and is automatically
applied again on the next call.
Telephone Reception
1
When this unit receives a call, the screen is
switched to RINGING display of Telephone mode.
2
When AUTO call (setting of AUTO/MANUAL call
page 32) is selected, CONNECT display appears
and this unit enters AUTO call mode in 3 seconds
after receiving.
3
To cut the call, press
2
(
). Or the call is
automatically cut in 5 seconds after finishing.
The screen returns to the previous source mode.
To input any number or symbol during call:
1 Press
3
(
TENKEY MODE
) in the CONNECT display.
The DIAL Sending display appears.
2 Turn the
Rotary encoder
to select your desired
Number or symbol, then press the
Rotary encoder
to
enter it.
3 Press
7
(
RETURN
) to return the previous screen.
Calling
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone numbers
registered in No. 1 to 9 of the address book.
1
Press the
Rotary encoder
for more than 2
seconds.
The Speed Dial display appears.
2
Press the desired function button.
If the telephone numbers have been registered in No.6 to
9, press
6
(
6 - 9
).
The Function Guide is switched to the function buttons
1
(
6
) to
4
(
9
).
3
Press
1
(
) to start call.
4
To cut the call, press
2
(
). Or the call is
automatically cut in 5 seconds after finishing.
•
If no telelphone number is registered in the selected function
button, "NO PRESET" is displayed for 5 seconds.
Press
7
(
RETURN
) to return to the Telephone menu display.
•
When
1
(
SPEED DIAL
) is pressed in the Telephone menu
display, the Speed Dial display appears.
•
By pressing your desired function button for more than 2 seconds
in step 2, you can start call directly.
Continued
Dial call
Input the telephone number using the dial.
1
Press and hold the
Rotary encoder
for more than
2 seconds.
The Speed Dial display appears.
2
Press
7
(
RETURN
).
The Telephone menu display appears.
3
Press
4
(
DIRECT CALL
).
The Direct Call display appears.
4
Turn the
Rotary encoder
to select the desired
number, then press the
Rotary encoder
to enter
the first digit.
;
BACK or NEXT
:
: The cursor on the input number
moves left or right.
DELETE:
Deletes a blank space or a number.
Pressing more than 2 seconds
deletes all input numbers.
5
Press
1
(
) to start call.
•
The call is cut in 5 seconds after "NO NETWORK COVERAGE" is
displayed. Or press
2
(
) to cut the call.
To listen to the answer-phone or to input numbers:
1 In the CONNECT display, press
3
(
TENKEY MODE
).
The Dial Sending display appears.
2 Turn the
Rotary encoder
to select your desired
Number or symbol, then press the
Rotary encoder
to
enter it.
3 Press the
7
(
RETURN
) button to return to the previous
screen.
6
To cut the call, press
2
(
). Or the call is
automatically cut in 5 seconds after finishing.
The screen returns to the previous source mode.
•
If
7
(
RETURN
) is pressed in 5 seconds after the call is cut, the
Telephone menu display appears. Pressing
1
(
) dials the
number again.
