8
-EN
PTY (Programme Type) Tuning
1
Press
F/SETUP
so that the “FUNC” indicator lights
up.
2
Press
3/PTY
to activate the PTY mode, while the
unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently received
will be displayed for 5 seconds.
If there is no receivable PTY broadcast, “NO PTY” will be
displayed for 5 seconds.
If no RDS station can be received, the display shows “NO
PTY.”
• If no operation is performed within 5 seconds after pressing
3/PTY
,
the PTY mode will be automatically cancelled.
3
Press
g
and
f
within 5 seconds after
activating the PTY mode to choose the desired
programme type while the PTY (programme type)
is being displayed.
Each press scrolls the programme type by one.
4
Press
3/PTY
within 5 seconds after selecting the
programme type to start searching for a station in
the selected programme type.
The chosen programme type display blinks during
searching and lights when a station is found.
If no PTY station is found, “NO PTY” will be displayed for 5
seconds.
5
Press
F/SETUP
to activate the normal mode.
The “FUNC” indicator goes out.
• Operate the unit while the “FUNC” indicator lights up. If no
operation is performed within 5 seconds, the “FUNC” indicator
goes out.
LIGHT M
↔
CLASSICS
↔
OTHER M
PI SEEK Setting
1
Press and hold
F/SETUP
for at least 2 seconds.
2
Press
g
or
f
to select “PISK.”
3
Press
BAND
to toggle the mode between
“PISK ON” and “PISK OFF.”
4
Press
F/SETUP
to set the selected mode.
Receiving Traffic Information
1
Press
T.INFO
so that the “T.INFO” indicator lights
up.
2
Press
g
or
f
to select your desired traffic
information station.
When a traffic information station is tuned in, the “TP”
indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast, the
unit is set in the standby mode. When a traffic information
broadcast begins, the unit automatically receives it and
the display shows “TRF-INFO” for a few seconds and
returns to the PS display.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
• If the traffic information broadcast signal falls below a certain
level, the unit remains in the receiving mode for 1 minute. If the
signal remains below a certain level for over 1 minute, the
“T.INFO” indicator blinks.
• If you do not want to listen to the traffic information being
received, lightly press
T.INFO
to skip that traffic information
message. The T.INFO mode will remain in the ON position to
receive the next traffic information message.
• If the volume level is changed while receiving traffic information,
the changed volume level will be memorized. When traffic
information is received next time, the volume level will be
automatically adjusted to the level memorized.
• In the T.INFO mode, the SEEK tuning selects only the TP stations.
Содержание CDE-9827R
Страница 29: ...LUFTPORT PAR AVION PRIORITAIRE ...
