17
-EN
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
1
Press
AUDIO
repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBWOOFER
*1
BASS LEVEL
*2
TRE LEVEL
*2
BALANCE
FADER
DEFEAT
VOLUME
SUBWOOFER
*1
When the subwoofer mode is set to OFF, its level cannot be
adjusted, refer to “Turning Subwoofer ON/OFF” on page 18.
*2
Adjustable only when DEFEAT is OFF.
Note
• If no operation is performed for 5 seconds, the unit automatically
returns to normal mode.
2
Turn the
Rotary encoder
until the desired sound is
obtained in each mode.
By setting DEFEAT ON, previously adjusted level settings of BASS
and TREBLE will return to the factory defaults.
Sound Setting
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
1
Press and hold
AUDIO
SETUP
for at least 2 seconds to
activate the SETUP mode.
2
Turn the
Rotary encoder
to select AUDIO, and then press
ENTER
.
AUDIO
*1
GENERAL
DISPLAY
TUNER
SIRIUSXM
*2
IPOD&USB
APP
BLUETOOTH
AUDIO
*1
Adjustment cannot be performed during phone call.
*2
Displayed only when a SiriusXM Tuner is connected.
(CDE-HD148BT only)
3
Turn the
Rotary encoder
to select the desired sound
setting menu, and then press
ENTER
.
FACTORY EQ
*3/*4
9BAND P-EQ
*3/*5
VOL LV ADJ
SUBWOOFER
SUBW PHASE
*6
SUBW SYS
*6
POWER IC
MX SETTING
*3
LENGTH
*3
TCR
*3
SPATIAL
*3
X-OVER
*3
FACTORY EQ
*3
Adjustment cannot be performed when DEFEAT is set to ON.
*4
Any changes made to either FACTORY EQ or 9BAND P-EQ are
reflected in the others’ settings.
*5
In step 3, after selecting a Band (BAND1 to BAND9) from
9BAND P-EQ adjustment mode, turn the
Rotary encoder
to
select the desired item, and then press
ENTER
to continue to
step 4.
*6
These functions are inoperable when Subwoofer is set to OFF.
4
Turn the
Rotary encoder
to change the setting, and then
press
ENTER
.
(e.g. Select SUBWOOFER ON or SUBWOOFER OFF)
5
Press and hold
AUDIO
SETUP
for at least 2 seconds to
return to normal mode.
Notes
• Pressing
t
returns to the previous Sound menu mode.
• If no operation is performed for 60 seconds, Sound menu mode is
canceled.
10 typical equalizer settings are preset at the factory for a variety of
musical source material. USER settings are created in the 9BAND P-EQ
mode.
USER
FLAT (Initial setting)
POPS
ROCK
NEWS
JAZZ
ELEC DANCE
HIP HOP
EASY LIS
COUNTRY
CLASSICAL
Note
• The 9-Band, Parametric EQ is used to create the Factory EQ settings.
Sound Setting
Subwoofer
+0 ~ +15
Bass level
−7 ~ +7
Treble level
−7 ~ +7
Balance
L15 ~ R15
Fader
R15 ~ F15
Defeat
ON/OFF
Volume
0 ~ 35
AUDIO/SETUP
/ENTER
Rotary encoder
Preset buttons
(1 through 6)
Use steps 1 to 5 to select the category you wish to modify. For
details on how to change each setting, see the following
sections below.
Equalizer Presets (FACTORY EQ)
