Alpine CDE-130R, Руководство пользователя

Страница: 6 / 22

5
-EN
Listening to Radio
1
Press
SOURCE
/ to select RADIO mode.
2
Press
BAND
/ / repeatedly until the desired radio
band is displayed.
FM1 FM2 FM3 MW LW FM1
3
Press or to tune in the desired station.
Press and hold or for at least 0.5 seconds to seek
station.
Presetting Stations Manually
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6)
into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 30 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2, FM3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Presetting Stations Automatically
1
Press
BAND
/ / repeatedly until the desired radio
band is displayed.
2
Press and hold
A.ME
for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The radio will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
• If no stations are stored, the radio will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
Press
BAND
/ / repeatedly until the desired band
is displayed.
2
Press any one of the station
preset buttons
(1 through 6)
that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
Radio
BAND/ /
A.ME
Preset buttons
(1 through 6)
SOURCE/