22
-EN
01GB05CDA-9887R.fm
ALPINE CDA-9887R 68-08564Z21-A (EN)
5
Repeat steps 3 and 4 to set another speaker.
6
When the setting has been completed, select any
one of the
preset buttons (1 through 6)
, press
and hold the desired preset buttons for at least 2
seconds.
7
Turn the
Rotary encoder
to select PROTECT
YES/NO, and then press
/
/ENT
to store the
adjusted contents.
PROTECT YES
PROTECT NO
(Initial setting)
•
If YES is selected, the adjusted contents are protected and stored into
the preset buttons. When you want to store the parameter into a
protected preset button, “REPLACE NO/YES” can be selected.
•
If NO is selected, the preset is stored.
8
After setting, press and hold
/ESC
for at least 2
seconds to return to normal mode.
•
The stored contents are not deleted even when resetting the unit or
disconnecting the battery.
•
The stored contents can be recalled by performing operation in
“Recalling the Stored Time Correction Settings” (page 22).
•
Pressing
AUDIO/RTN
when Time Correction is adjusted will return
to the previous item.
•
If MultEQ is turned on, the A.SEL button is ineffective. For details,
refer to “Turning MultEQ on/off” (page 16).
•
If no operation is performed for 60 seconds, the unit will return to the
normal mode.
Recalling the Stored Time Correction
Settings
1
Press
A.SEL
to recall the DSP adjust mode.
Media Xpander
Crossover
T.Correction
Parametric EQ
/
Graphic EQ
Media Xpander
2
Turn the
Rotary encoder
to select the
T.Correction mode, and then press
/
/ENT
.
3
Press any one of the
preset buttons (1 through 6)
that has your desired characteristic in memory.
4
Press the preset buttons again to return to the DSP
adjust mode.
5
Press and hold
/ESC
for at least 2 seconds to return
to normal mode.
•
Pressing
AUDIO/RTN
during the procedure will return to the
previous mode.
Setting the MX Mode
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, and iPod, will be
able to reproduce the music clearly even in cars with a lot of road noise.
1
Press
SOURCE/
to select the source to which you
want to apply Media Xpander.
2
Press
A.SEL
to recall the DSP adjust mode.
Media Xpander
Crossover
T.Correction
Parametric EQ
/
Graphic EQ
Media Xpander
3
Turn the
Rotary encoder
to select the Media
Xpander mode, and then press
/
/ENT
.
4
Turn the
Rotary encoder
to select the desired
Media Xpander level.
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and produces
well balanced sound at all frequencies.
CD (MX level 1 to 3):
CD mode processes a large amount of data during playback.
MX takes advantage of this large data quantity to reproduce a
more clear, clean output.
CMPM (MX level 1 to 3):
This corrects information that was lost at the time of
compression. This reproduces a well-balanced sound close to
the original.
DVD (Video CD)
(MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(DVD MUSIC):
A DVD or Video CD contains a large quantity of data such as
music clip. MX uses this data to reproduce the sound
accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that
corresponds to the media connected.
If two external devices are connected, a different MX mode for
each media can be selected.
5
After setting, press and hold
/ESC
for at least 2
seconds to return to normal mode.
•
To cancel MX mode for all music sources, set MX to OFF.
•
Each music source, such as FM radio, CD, and MP3/WMA/AAC can
have its own MX setting.
•
On disks with both MP3/WMA/AAC and CD-DA, when the source
changes from “MP3/WMA/AAC to CD-DA” or “CD-DA to MP3/
WMA/AAC”, MX-mode switching may delay playback slightly.
•
Setting to Non Effect sets MX mode of each music source to OFF.
•
This function is inoperable when DEFEAT is set to ON.
•
There is no MX mode for MW and LW radio.
•
If an audio processor with the MX function (PXA-H701, etc.) is
connected, its own MX processing is applied to the music source.
Since the processor MX settings may not match the head unit, the
audio processor needs to be adjusted. For details, refer to the
Owner’s Manual of the audio processor.
•
“CMPM” is applied for MP3/WMA/AAC and iPod.
•
If no operation is performed in 60 seconds, the unit will return to the
normal mode.
01GB00CDA-9887R.book Page 22 Thursday, March 15, 2007 3:55 PM
