10
-EN
01GB05CDA-9887R.fm
ALPINE CDA-9887R 68-08564Z21-A (EN)
PI SEEK Setting
1
Press and hold
FUNC./SETUP
for at least 2
seconds to activate the SETUP mode.
2
Turn the
Rotary encoder
to select the TUNER
mode, and then press
/
/ENT
.
Bluetooth
GENERAL
AUDIO
DISPLAY
TUNER
Bluetooth
3
Turn the
Rotary encoder
to select PI Seek, and
then press
/
/ENT
.
4
Turn the
Rotary encoder
to select ON or OFF.
5
Press and hold
FUNC./SETUP
for at least 2
seconds to return to normal mode.
•
Pressing
AUDIO/RTN
during the procedure will return to the
previous mode.
•
If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is cancelled.
Setting PTY31 (Emergency Broadcast)
reception
Turn PTY31 (Emergency Broadcast) reception ON/OFF.
1
Press and hold
FUNC./SETUP
for at least 2
seconds to activate the SETUP mode.
2
Turn the
Rotary encoder
to select the TUNER
mode, and then press
/
/ENT
.
Bluetooth
GENERAL
AUDIO
DISPLAY
TUNER
Bluetooth
3
Turn the
Rotary encoder
to select Alert PTY31,
and then press
/
/ENT
.
4
Turn the
Rotary encoder
to select ON or OFF.
If you set to ON, emergency broadcasts are received
regardless of source. “ALARM” is displayed during
reception.
5
Press and hold
FUNC./SETUP
for at least 2
seconds to return to normal mode.
When an emergency broadcast is received, the volume
level will be automatically changed to the memorized level
in the traffic information mode. For details, refer to
“Receiving Traffic Information” on page 10.
•
Pressing
AUDIO/RTN
during the procedure will return to the
previous mode.
•
If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is cancelled.
Setting the Time to automatically Adjust
When you set to ON, the time is automatically adjusted by RDS data.
1
Press and hold
FUNC./SETUP
for at least 2
seconds to activate the SETUP mode.
2
Turn the
Rotary encoder
to select the TUNER
mode, and then press
/
/ENT
.
Bluetooth
GENERAL
AUDIO
DISPLAY
TUNER
Bluetooth
3
Turn the
Rotary encoder
to select Auto Clock, and
then press
/
/ENT
.
4
Turn the
Rotary encoder
to select ON or OFF.
5
Press and hold
FUNC./SETUP
for at least 2
seconds to return to normal mode.
•
Pressing
AUDIO/RTN
during the procedure will return to the
previous mode.
•
If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is cancelled.
Receiving Traffic Information
1
Press and hold
BAND/TA
for at least 2 seconds so
that the “TA” indicator lights up.
2
Press
or
to select your desired traffic
information station.
When a traffic information station is tuned in, the “TP”
indicator lights up.
Traffic information is heard only when it is being broadcast.
If traffic information is not being broadcast, the unit is set in
the standby mode. When a traffic information broadcast
begins, the unit automatically receives it and the display
shows “T. INFO”.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
•
If the traffic information broadcast signal falls below a certain level,
the unit remains in the receiving mode for 1 minute. If the signal
remains below a certain level for over 1 minute, the “TA” indicator
blinks.
•
If you do not want to listen to the traffic information being received,
lightly press
BAND/TA
to skip that traffic information message. The
TA mode will remain in the ON position to receive the next traffic
information message.
•
If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the memorized one if it is within the range 5 to 20. Otherwise, the
volume level will be automatically adjusted to 5 (memorized level is
below 5) or 20 (memorized level is above 20).
•
In the TA mode, the SEEK tuning selects only the TP stations.
01GB00CDA-9887R.book Page 10 Thursday, March 15, 2007 3:55 PM
