Alpine CDA-9884E, Руководство пользователя

Страница: 19 / 84

17
-EN
01GB05CDA9884.fm
ALPINE CDA-9884E 68-09359Z41-A (EN)
Demonstration
This unit has a demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.
Playing MP3/WMA/AAC Data (PLAY MODE)
This unit can play back CDs containing both CD and MP3 /WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD
data. When a disc contains both CD and MP3/WMA/AAC data,
playback starts from the CD data portion of the disc.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first. (If you use an MP3 changer, you have to
change discs.)
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to
OFF.
Turning Mute Mode On/Off (INT MUTE)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Setting the AUX+ SETUP Mode
An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
You can change the AUX+ NAME display when AUX+ SETUP is set to
ON. Press
/ ENT when AUX+ SETUP is set to ON, and select
AUX+ NAME by turning the Rotary encoder , then press / ENT .
After that, turn the Rotary encoder to select the desired AUX+ NAME.
Setting the AUX+ Level (AUX IN GAIN)
After setting to ON in “Setting the AUX+ SETUP Mode”, this setting
can be carried out.
DEMO ON / DEMO OFF (Initial setting)
MP3/WMA/AAC
CD-DA (Initial setting) / CD-DA&MP3
CD-DA: Only the CD data in Session 1 can be played
back.
CD-DA&MP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
External Device
POWER IC ON (Initial setting) / POWER IC OFF
POWER IC OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit’s internal amplifier is
turned OFF and can not drive speakers.
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right
POWER IC ON: The speakers are driven by the built-in
amplifier.
MUTE ON / MUTE OFF (Initial setting)
AUX+ ON / AUX+ OFF (Initial Setting)
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/
is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPod is connected.
LOW (Initial setting ) / HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
01GB00CDA9884.book Page 17 Friday, September 28, 2007 10:24 AM