11
-EN
Listening to Radio
1
Press
SOURCE
to select TUNER mode.
2
Press
BAND
repeatedly until the desired radio band is
displayed.
FM1
FM2
FM3
MW
LW
FM1
3
Press
TUNE
A.ME
to select the tuning mode.
DX (Distance mode)
LOCAL (Local mode)
MANUAL (Manual
mode)
DX (Distance mode)
Note
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
or
to tune in the desired station.
Holding down
or
will change the frequency
continuously.
Presetting Stations Manually
Tune in the station you want to store. Press and hold, for at
least 2 seconds, any one of the
preset buttons (1 through
6)
into which you wish to store the station.
The display shows the band, preset number and station
frequency memorized.
Notes
• A total of 30 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2, FM3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Presetting Stations Automatically
1
Press
BAND
repeatedly until the desired radio band is
displayed.
2
Press and hold
TUNE
A.ME
for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Note
• If no stations are stored, the tuner will return to the original station you
were listening to before the auto memory procedure began.
Tuning to Preset Stations
Select the desired band, then press any one of the station
preset buttons (1 through 6)
that has your desired radio
station in memory.
The display shows the band, preset number and frequency of
the station selected.
Frequency Search Function
You can search for a radio station by its frequency.
1
Press the
Rotary encoder
to activate the FUNCTION LIST
mode while the unit is in Radio mode.
2
Turn the
Rotary encoder
to select FREQ Search mode, and
then press
ENTER
.
AF
NEWS
PTY
FREQ Search
3
Turn the
Rotary encoder
to select the desired frequency.
4
Press
ENTER
to receive the selected frequency.
Note
• Press
in the search mode to cancel. Or, the search mode will be
cancelled if no operation is performed for 10 seconds.
Radio
SOURCE/
TUNE/A.ME
BAND
/ENTER
Rotary encoder
Preset buttons
(1 through 6)
