Alpine Alpine F#1 Status PXI-H990 Скачать руководство пользователя страница 93

Страница: 93 / 115

Using the multi-channel function

TITLE

6.1-Channel
Settings (6.1CH
MODE)

PCM Output
Settings (PCM OUT
MODE)

Description

The operations performed with the remote control unit in
step 1 can also be performed by pressing and holding

MENU (SETUP)

for at least 3 seconds, moving the joystick

up or down to select “AP SETUP”, then pressing the joystick.

When the speaker is set to “OFF” mode, audio is not
produced from that speaker. See “Setting the speakers”,
(page 7) and “Speaker setup”, (page 53).

Once the settings are made, we recommend storing them in
the memory. See page 93 for instructions.

The operations performed with the remote control unit in
steps 1 can also be performed by pressing and holding

MENU (SETUP)

for at least 3 seconds, moving the joystick

up or down to select “AP SETUP”, then pressing the joystick.

When a speaker is set to the “OFF” mode, no sound is
output from that speaker. See “Setting the speakers” (page
7).

The “DOLBY PROLOGIC

” and “DTS Neo:6” settings are

only valid for 2-channel audio signals (including PCM and
bit stream).

Once the settings are made, we recommend storing them in
the memory. See page 93 for instructions.

When playing back 96kHz or 192kHz DVD-Audio when
DOLBY PRO LOGIC

or DTS Neo:6 mode is selected, the

audio signal is automatically down sampled to 48KHz and
played back.

When “PL

MUSIC” is selected

This adjustment, there is no effect from CENTER WIDTH. If
the centre speaker is set to “OFF” in the speaker setup
settings.

“BI PHANTOM” is turned off when “CENTER WIDTH” is
enabled.

Supplementary
information

This page includes supplementary information for pages 52 to 87.
Please refer to these pages.

Page 77

Page 80

Page 83

Page 82

Page 77

Содержание Alpine F#1 Status PXI-H990




















































































































Результаты поиска

Содержание Alpine F#1 Status PXI-H990

Отзывы:

Похожие инструкции для Alpine F#1 Status PXI-H990

Бренды по названию

Популярные бренды

Alpine Alpine F#1 Status PXI-H990, Руководство пользователя

Результаты поиска

Содержание Alpine F#1 Status PXI-H990

Отзывы:

Похожие инструкции для Alpine F#1 Status PXI-H990

Бренды по названию

Популярные бренды