2
Safety Precautions
Before using this unit please read these operating instructions carefully. Take special care to follow the warnings
indicated on the unit itself as well as the safety suggestions listed below. Keep these precautions at hand for
future reference.
Placement
- Avoid placing the unit in areas of:
• direct sunlight.
• high temperature.
• high humidity.
• excessive vibration.
• uneven surfaces. (Place the unit on a flat level surface.)
Such conditions might damage the cabinet and/or other component parts and thereby shorten the unit's service
life.
Stacking
- Never place heavy items on top of the unit, the DC power supply unit, or AC power cord.
Voltage
- Avoid the use of a “high voltage” AC power source. It is an extremely dangerous fire hazard.
- A DC power source cannot be used. Be sure to check the power source carefully.
- The working input voltage range is 90-264V AC.
Power Cord Protection
- Avoid using AC power cords with cuts, scratches, or poor connectors, as this may result in fire or electric shock.
Excessive bending, pulling or slicing of the cord should also be avoided.
- Do not pull on the cord when you are disconnecting the power. This could cause an electric shock. Grasp the
plug firmly when you disconnect the power supply.
- Never touch the plug with wet hands as a serious electric shock could result.
Foreign Materials
- Ensure that no foreign objects (e.g. - needles, coins, screwdrivers), accidentally fall into the unit. Otherwise, a
serious electric shock, short circuit, or other malfunction could occur.
- Be extremely careful about spilling water or liquid on or into the unit, as a fire, short circuit, or electric shock
can also occur. Disconnect the power plug and contact your dealer immediately if this occurs.
- Avoid spraying volatile chemicals (e.g.- insecticides, alcohol, paint thinner) on or into the unit. They contain
flammable gases which can be ignited.
- Insecticides, alcohol, paint thinner and similar chemicals should never be used to clean the unit. They can
cause flaking or cloudiness to the cabinet finish.
