to its current position. The
Adjust-Up
and
Adjust-Down
buttons will adjust the longer blue pen position. Once the pen is set,
the
Pen Home
button will move the longer blue pen to the outer edge of the chart and the shorter red pen will move to its new
position. Each time pen home is pressed the two pens will switch positions (moving the most recently adjusted position) until
the
On/Off
button is pressed to exit pen adjust mode.
The blue pen has a longer pen arm the red pen has a shorter arm. The pens are offset to allow the red pen to glide under the
blue pen. The blue pen indicates the correct time and the red pen precedes it by 3/16 of an inch.
Note:
Pressing the
On/Off
button will exit the adjustment and return the unit to normal operation. Each time the
Pen
Home
or
On/Off
button is pressed, the adjustment currently in progress will be stored. The unit will take one minute to exit Pen
Adjust Mode once the
On/Off
button is pressed.
Warranty
Dickson warrants that the products it sells will be free from defects in material and workmanship under normal use and service
for a period of twelve months after delivery. In the event of a claim under this warranty, the product or part must be returned to
the factory for repair or replacement (shipping pre-paid) with a Return Authorization Number (see Return Information above). It
will be repaired at Dickson’s option without charge. This warranty DOES NOT cover routine calibration, pen, chart and battery
replacement. The foregoing warranty and remedy are exclusive and in lieu of all other warranties either expressed or implied.
Dickson shall not be liable for consequential or incidental damages resulting from failure or malfunction of its products. Dickson
makes no warranty for products not manufactured by it or for any products modified by buyer, or subject to misuse or neglect.
Factory Service & Returns
Contact the factory (630-543-3747) for a Return Authorization (RA) Number before returning any instrument. The model
number, serial number and a purchase order number will be requested before an RA number is issued. Carefully repack the
instrument, label the outside of the box with the RA# and return the instrument (freight pre-paid) to Dickson.
All instruments that do not have the RA# clearly marked on the outside of the box will be refused.
When returning instruments for credit, please include all accessories in shipment. Calibration/Freight charges are non-
refundable.
NOTE:
Dickson shall not be liable for consequential or incidental damages resulting from failure or malfunction of its products
Replacement Sensor Certificate of Validation
Dickson ensures that the Replaceable Sensors / Instruments listed below were developed, tested and validated together.
Replaceable Sensor / Instrument:
KT8P0/KT8P2/KT8P3
Operation
The Instruments and Replaceable Sensor models listed above were specifically designed to work together. No other sensors
will work with the Instrument models listed. No other Instrument will work with the Replaceable Sensors listed. The
Replaceable Sensor must be connected to the Instrument for the Instrument to operate properly.
Customer Satisfaction
Dickson takes pride in providing you, the customer, with the highest quality instrumentation. We welcome the opportunity to
help you in any way possible. Whether it be a question or a new idea in documentation,
the Dickson Company would like to hear your response. Please call our Customer Service Department at 1-800-323-2448 or
(630) 543-3747 (in Illinois).
Software Return Policy
IMPORTANT -
Read your Software License Agreement carefully before installing software. Dickson will accept returns for
replacement of defective disks and CDs only.
