Alpha Technologies Tri Power X31 HE, Руководство пользователя

Страница: 16 / 55

- 16 -
P
RELIMINARY
C
HECK OF
C
ONTENTS
Having opened the package, start by checking the contents.
TRIPOWER X31 HE BATTERY BOX (optional)
Metal slides, Guarantee document, User manual, Cd-
rom containing the UPS management software, Serial
connecting cable, 4 battery fuses (to be inserted in the
"SWBATT" fuse holders), Front door key (
Standard
version only ), Short circuit bar (with 3 fastening
screws)
Metal slides, Guarantee document, Cable for connecting
the Battery Box to the TRIPOWER X31 HE (
Optional
Small Size version only ), 4 battery fuses (to be inserted
in the "SWBATT" fuse holders), Front door key ( Standard
version only )
I
NSTALLING THE
TRIPOWER X31 HE
AND THE
B
ATTERY
B
OX
When installing the equipment, the following points should be considered:
 The wheels are to be used exclusively for fine positioning, and thus for small distances only.
 The plastic parts and the door are not to be used for gripping or pushing the TRIPOWER X31 HE.
 Sufficient space should be left in front of the equipment for it to be turned on/off and maintenance operations to be
performed on it (

1.5 mt )
 The rear part of the TRIPOWER X31 HE should be set at least 30 cm from the wall, to enable the air blown by the
ventilation fans to flow away correctly
 No objects should be left on its top surface
Having set the equipment in position, secure it by engaging the brake rod (see "Front Views of the TRIPOWER X31 HE" point 8)
situated below the connecting terminals.
(Standard version only): In seismic areas or for mobile systems, the brackets used to fasten the unit to the pallet (ramps) can
be reused to anchor the UPS to the floor (see the figure below). In normal conditions, the brackets are not necessary.
S
TEPS TO BE
T
AKEN TO
G
AIN
A
CCESS TO THE
T
ERMINALS OF THE
TRIPOWER X31 HE /
B
ATTERY
B
OX
The operations indicated below are to be performed with the UPS disconnected from the mains powers,
turned off and with all the switches and fuse holders of the equipment open.
Follow the instructions provided below to open the TRIPOWER X31 HE:
 Open the door
 Remove the terminal and switches cover (see "Views of the TRIPOWER X31 HE" ref. 7)
Having completed the installation operations inside the equipment, replace the terminal cover and close the door.