Alpha Technologies GSM-VarioBell, Руководство пользователя

Страница: 27 / 65

26
Due security reasons, the parameters of the GSM-VB are
possible to setup from numbers saved on the SIM card under
names ADMIN1 to ADMIN9 only.
SMS are always written in CAPITAL (BIG) LETTERS!
Each SMS elements are always split by space (words). First
word is always command. Further word (s) is one or more
parameters.
Example:
INIT 420123456789
All commands are in an appropriate table in this manual
further.
1. During the first setup when the SIM card
doesn’t contain any
ADMINx name, it is necessary to write such a number to the
SIM card via an SMS message using the INIT command.
You can send this SMS message from any GSM number.
When the SIM card already contains a number under the
name ADMINx, then the command will be ignored.
2. When you need to control the relay eventually by setup
GSM-VB from next ADMIN numbers perform the following:
from a mobile phone with ADMINx number send
progressively SMS to GSM-VB with numbers of next
ADMINx in the SMS format: WRITE ADMIN2
+420xxxxxxxxx (WRITE ADMIN3… etc.)
3. From a mobile phone with numbers ADMINx send
progressively SMS to GSM-VB with numbers which should
be dialed after pressing the button, SMS format: WRITE
AB420xxxxxxxxx (WRITE BBUTTON1… etc.)
4. Based on your needs, send next SMS with other
parameters for opening by ringing, SMS alarm sending, etc.
5. Setup parameters GSM-VB (via table). Parameters can be
setup individually for each parameter with an appropriate
SMS. When you need to setup more parameters
simultaneously, we recommend using SMS for batch