manualshive.com logo in svg

Alpha Microsystems AM-6060, Руководство пользователя

Поделиться
Скачать
Alpha Microsystems AM-6060 Скачать руководство пользователя страница 61

Troubleshooting Procedures

Page 7-3

AM-6060 Computer Owner's Manual, Rev. 00

Procedure #1: Check Power and Activity Lights

A.  Are the power light and fan on? If yes, go to Step B. If the fan is on but the power light isn't, your

power light may be burnt out. Go to Step B.

1.  Press the power button to turn the computer off.

Make sure the power cord is not damaged and is the correct type for your geographical area.
Make sure it is plugged in firmly on both ends. If there is a problem with the cord, correct it and
go to "Procedure #3: Power-up/Reset." If the computer comes up correctly, your problem is
fixed.

2.  Check the electrical source by plugging something else into the outlet, such as a lamp. If there is

a problem with the outlet, correct it and go to "Procedure #3: Power-up/Reset." If the computer
comes up correctly, your problem is fixed.

3.  Check to make sure your computer is configured for the proper input voltage by checking to see

the voltage setting is correct on the voltage switch on the back panel of your computer.

Caution: If you have operated the computer with the improper input voltage, you may
have damaged the computer.

If your computer is configured incorrectly, change the voltage switch to the proper setting, and
perform "Procedure #3: Power-up/Reset" only ONCE. If the computer does not come up
correctly, shut off the power and contact your VAR for help; stop. If it does, your problem is
fixed.

If your computer is configured correctly, proceed.

4.  If the voltage configuration is correct, and the power cord is OK and in place correctly, but the

power light is still not on, call your VAR for help. Stop.

B.  OK, the power light is on. Is the activity light on, at least intermittently? If so, skip to Step C.

1.  If the activity light is off, then perform "Procedure #2: Check the System Status Codes." If the

procedure does not find and correct any problems, proceed.

2.  Perform "Procedure #3: Power-up/Reset," ONCE. If that procedure does not correct the problem,

proceed.

3.  Perform "Procedure #5: Self Test." Call your VAR with the results of your self test and ask for

help. Stop.

C.  The power and activity lights are both on. Check the front panel display: after booting successfully

the status LED will display a 0 and the activity light should be on. If a status code appears on the
front panel display and the computer does not boot, compare the status code with the codes shown
in Procedure #2.

Perform "Procedure #5: Self Test." Call your VAR with the results of the self test and ask for help.
Stop.

D.  No problem was found in this section. Please perform the next procedure on your checklist.

Содержание AM-6060






























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды