DEU
ENG
26
Commissioning
Alpha IP FSM 26001
5.2 Teach-in of the device
Prior to operating the switch actuator and meter, it must be integrat-
ed into the Alpha IP system via the Access Point (HAP 21001). For this,
teach-in the respective device as follows.
Ö
The Alpha IP Access Point has been set up via the Alpha IP app.
Ö
The switch actuator and meter is assembled and installed.
1. Open the Alpha IP app on your smart phone.
2. Select the menu item Teach-in device.
After assembly and installation, the teach-in mode is active for three
minutes after switching on the mains voltage.
The teach-in mode can be activated manually by switching the mains
voltage on and off.
3. The device will be displayed automatically in the app.
4. For confirmation of the teach-in process, enter the last four digits of
the device number (SGTIN) in the app or scan the supplied QR code.
The device number can be found on the back side of the device.
The LED will light up in green after a successful teach-in process. The
process must be repeated if the LED lights up in red.
5. Follow the directions of the Alpha IP app.
