Alpha-InnoTec LW 161H-A, Руководство по эксплуатации

Страница: 10 / 40

10
Subject to change without notice | 83061500bUK | ait-deutschland GmbH
16.1 Transport to the installation
location
To prevent damage during transport, transport the
packed unit to its final installation location using a
pallet truck, forklift truck or crane.
WARNING
Risk of tilting and overturning on lifting
the unit from the wooden pallet and during
transport! People can be injured and equip-
ment damaged; always work with several
people.
► Take suitable precautions to prevent the
risk of overturning.
IMPORTANT
Never use components and hydraulic
connections on the unit for transport
purposes.
IMPORTANT
Do not tilt the unit by more than 45° maximum
(in any direction).
16.2 Preparing for installation
1. Remove lower facing panels on the switch box
side and the water connection side of the unit.
1 Quick-release screws
2 Lower facing panel
Undo the quick-release screws. Turn through 90°
to the left.
2. On both sides, pull the lower facing panel up-
wards and outwards at an angle, lift out and put
in a safe place.
Lifting the unit with tube handles
Rear:
IMPORTANT
Make sure that the tube handles do not
damage cable harnesses and components in
the unit.
Lift the unit with the inserted tube handles, with at
least four people (one for each tube handle) and place
on the base. Make sure that the unit's baseframe is in
full contact with the surface of the ground.