15
Subject to change without notice | 83054200hUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Lift unit by the pipes, with at least four persons, and
place on the base. Make sure that the frame of the
unit is in full contact with the underlying surface.
LIFTING THE UNIT WITH A CRANE
NOTICE
Models LW 251… and higher must be lifted using
a crane.
Remove side laths on the wooden pallet…
Guide lifting straps under the unit. Insert laths or
beams between the lifting straps and the unit in or-
der to prevent damage to the housing, or remove
facing panels (see removal instructions under “At-
taching air flow baffles”)…
A Front view (operator side)
B Side view 1
DANGER
Lifting straps should not be too close to-
gether or too near the center; otherwise
the unit may tip!
C Side view 2
ATTENTION
Guide lifting straps past the fan on the side.
Make sure the straps do not press against the
ventilator during transport.
Lift unit with the crane and place on the base. Make
sure that the frame of the unit is in full contact with
base.
ATTACHING THE AIR FLOW BAFFLES
(only for LW 101… through LW 310…
WARNING
Unit has rotating parts.
For safety reasons, mount the two air flow
baffles on the unit before continuing with
any other work.
