Alpha Group OutBack Power MATE3, Руководство пользователя

Страница: 53 / 160

Operation
900-0117-01-00 Rev A
51
From the
CHARGER
hot key’s
Charger Status
screen, the
<Charger Mode>
soft key brings up a screen
that can enable or disable the charger. (See the inverter Operator’s Manual for a description of specific
charger functions.)
Figure 44 Using the CHARGER Hot Key (Charger Mode)
Soft Key Options:
<On> enables the charger for a charge cycle consisting of bulk , absorption and float stages. Upon completion,
the charger remains in the float stage to maintain the batteries until the AC input is disconnected.
Note : In OutBack grid-interactive inverters, this charging cycle is automatically selected when the
Input
Type
menu is set to Gen (see page 78.) The <On> option cannot be selected if the menu is set to Grid. In these
inverters, the Charger Mode menu can still enable or disable the charger, but it cannot select the cycle.
<Off> disables the charger.
<Auto> enables the charger for a charge cycle consisting of bulk , absorption and float stages. Upon
completion, the charger goes into silent mode until it reaches the “re-float” voltage, when it will re-enter the
float stage.
Note : In OutBack grid-interactive inverters, this charging cycle is automatically selected when the
Input
Type
menu is set to Grid (see page 78). This option cannot be selected if the menu is set to Gen. In these
inverters, the Charger Mode menu can still enable or disable the charger, but it cannot select the cycle.
Screen Items:
When
<On>
is selected, the screen will display Charger Control ON.
Bulk and Float Charging Enabled.
When <Off> is selected, the screen will display Charger Control OFF.
All Inverter Charging Disabled.
When <Auto> is selected, the screen will display Charger Control AUTO.
Automatic Charging Enabled.