Alpha Group OutBack Power Mate Micro Скачать руководство пользователя страница 22

Страница: 22 / 26

Operation

(06/2016)

Failure Information

The current failure information of the charge controller can be checked via the Failure Information page. A maximum of 15 failure

messages can be displayed. When the failures are eliminated, the corresponding failure information on the display will also be

eliminated.

Figure 18, Failure Information Screen

Table 11, List of Possible Failures

Failure Info

1. Over voltage

2. Over load

3. Short circuit

List of Possible Failures

Failure Information

Details

Load MOS-Short

The MOSFET load driver has been shorted.

Load Circuit

The load circuit has been shorted.

Load O. cur.

The load circuit is over current.

Input O. cur.

PV input is over current.

RPP Short

The reverse polarity protection MOSFET has been shorted.

RPP Break

The reverse polarity protecion MOSFET has been broken.

Char. MOS-Short

The charge driver MOSFET has been shorted.

Input O. cur.

The input is over current.

Disc. O.O.Ctrl.

Discharging is not being controlled.

Ctrler O.Temp.

The controller is over temperature.

Comm. Timeout

Communication has timed out between the OutBack Mate Micro and the charge controller.

Содержание OutBack Power Mate Micro



























Результаты поиска

Содержание OutBack Power Mate Micro

Отзывы:

Похожие инструкции для OutBack Power Mate Micro

Бренды по названию

Популярные бренды

Alpha Group OutBack Power Mate Micro, Руководство пользователя

Результаты поиска

Содержание OutBack Power Mate Micro

Отзывы:

Похожие инструкции для OutBack Power Mate Micro

Бренды по названию

Популярные бренды