zz
___________________________________________________________________
Alpha ESS Co., Ltd.
Page 27 of 75
Your Smart Energy
6.3
Mounting the SMILE-BAT-8.2PH and Inverter
6.3.1
Mounting the battery pack
1.
Lift the battery pack by using the handles at the two sides, take it out from the
package carton. Do not put the battery pack upside down on the ground.
2.
Place the battery positioning paper plate against the wall and the bottom against
the floor, and mark the positions of the two drill holes.
3.
Drill 2 holes on the wall with a diameter of 10mm and a depth of about 70mm.
4.
After cleaning the dust and other objects from the two holes, place 2 wall anchors
into the holes, then attach the battery wall bracket to the wall by using the SW10
hexagon sleeve. Please use a level to ensure that the wall bracket is horizontal.
