ALPENHEAT AH8, Руководство пользователя

Страница: 9 / 50

EN
D
SK
PL
SLO
HR
S
CZ
F
7
A.
Clips for attaching to straps and belts
1. Slip clip over strap or belt. (Figure 11). In order to attach securely, screw
the clip to the belt using the screw provided.
2. Insert battery pack into the clip holster. Battery pack will snap into place
and will be held securely by spring load retainers. (Figure 12)
3. Remove battery pack by pressing retainer button with 2 fingers whilst
lifting battery pack upwards. (Figure 13)
B. Mounting brackets for ski boots and other rigid plastic boots (bolt-on):
1. Drill a hole with a diameter of 5 mm / 0.2 inch in the outer shell of the
boot. (Figure 14)
2. Insert anti-swivel drive-in nut from inside of the boot into the hole.
(Figure 15)
3. Place the lock washer onto the hole from the outside of the boot.
4. Bolt on the mounting bracket with screw M4 (select the proper length for
your boot, L=10mm/0.4inch or L=16mm/0.64inch), and fasten tightly with
screwdriver. (Figure 16)
5. Insert battery pack into the clip holster. Battery pack will snap into place
and will be held securely by spring load retainers. (Figure 17)
6. Remove battery pack by pressing retainer button with 2 fingers whilst
lifting battery pack upwards.(Figure 18)
USE
The bootheaters can be used in all types of sturdy shoes/boots and are designed so that
they can easily be removed and used in any other shoe/boot.
Should the insoles get wet, let them dry out completely. This prolongs their life cycle.
Comfort bootheaters provide comfortable and continuous warmth for your feet. Do not
allow your feet to get cold in the first place, because more energy will be required to warm
them up, than if you had turned the heat on right at the beginning.
Warm up shoes/boots before putting them on by turning the battery packs on at setting 3
for 5 minutes.
Turn the heat on at setting 1 right from the start to maintain comfortable warmth. In cold
weather you might not feel the heat, but your feet will stay comfortably warm. The setting
should not be too high in order to prevent sweating, which cools the feet.
It may be necessary to use setting 2 as the basic setting to generate comfortable warmth
in very cold weather.
FEATURES - TECHNICAL DATA:
Heating Element:
Large sized heating element 43 cm² for the forefoot.
Flexible and durable: the heating element consists of heavy-duty layers of material which
have been welded together. Developed especially to fulfil the combination of bending and
pressure requirements of shoes/boots.
Standard AH8: Robust wire heating element
Plug:
The heavy-duty plug of the cable which connects to the battery pack has been specially
developed for sports and outdoor use. The plug is designed so that it plugs in easily, but
is secured against unintentional unplugging by a retaining mechanism.
Temperature and Heat Duration:
The following temperature and heating times are approximate values. The actual
performance depends on how the batteries were charged, the duration of the charging
process and on the various tolerances of the batteries and microcontrollers. The heating
times are guide values and apply for an outside temperature of –18° C / 0° F.