ALPCOUR MAGNETIC BIKE, Руководство по эксплуатации

Страница: 5 / 6

1. Remove the resistance controller and cable from your handlebars.
2.
Firmly but gently pull up the Lever Clamp on the top of trainer to
release the bike.
3. Be sure to hold your bike firmly when removing it from the trainer so it
doesn’t fall over.
4. Remove the front wheel block from underneath the front wheel and
your bike is now free from the trainer.
5. Replace the supplied quick release skewer with your bike’s skewer.
1. After use, simply fold and store in the carry bag out of the way until your
next use. Be careful not to pinch your fingers when folding and avoid
storing other equipment on top of your trainer stand.
2. Take proper care of the magnetic resistance unit, its adjustment knob
and the controller cable, because damage to this components might
render the training stand unusable.
REMOVING YOUR BIKE
FROM THE TRAINER STAND
1. How can I reduce noise when riding?
Change to unstripped slick tires to eliminate shaking. Place the trainer stand
on a blanket or mat.
2. Why doesn’t the resistance change when I turn the
dial?
The resistance wheel may be too loose, tighten the nut in the resistance
wheel to increase tension. The resistance level increases gradually, so wait for
a few seconds for the resistance wheel to tighten.
TROUBLESHOOTING
CARE AND
STORAGE INSTRUCTIONS
4