ALPATEC RCO 1505 E, Руководство пользователя

Страница: 9 / 12

S P E C I F I C A
S P E C I F I C A
T I O N S
T I O N S
U S I N G
U S I N G
1 - Place the heater on a flat surface, at least 50 cm from the wall.
2 - Plug the heater and press power switch (5) on the backside. An alarm is hear and the control panel dis-
plays the clock.
3 - Press MODE button, an alarm is hear and you can modify the running mode : high speed
medium
speed low speed only ventilation. The control panel displays the running mode and the heater
starts.
4- Press FONCTION button to set clock, timers and temperature.
5-To stop the appliance, press OFF button.
TEMPERATURE SETTING
When the heater is switch on, press FONCTION button (2) and select “temperature” function. An alarm is
hear. When the control panel displays “temp setting”, press “+ or –” button to set the temperature : from 5
to 35°C. Caution : do not set the temperature with the “only ventilation” mode.
CLOCK SETTING
When the heater is switch on, press FONCTION button (2). An alarm is hear and clock indicator blinks on
the control panel. Press “+ and-” to set the hours. Press again FONCTION button to validate hours (now the
hour shines and minutes blink). Press “+ and-” to set the minutes (10 minutes step), press again FONCTION
button to record the right clock. Hour and minutes are light on the control panel.
TIMER
The heater has a dual timer : you can preset 2 startings and 2 stops.
For example : the appliance will start at 7 am, stop at 9am, restart at 3 pm and stop at 4 pm. You must acti-
vate timer I and timer II.
TIMER I
Preset starting : press FONCTION button, an alarm is hear. “Set I “and “timer on” blink on the control panel.
Set the hour by pressing “+ and –” button. Press again FONCTION button to confirm the hour (now the hour
shines and minutes blink). Press “+ and -” to set the minutes, press again FONCTION button to record the
minutes. Timer I is activate.
For example : for a starting at 7am, set “7:00”.
PRESET STOP :
press FONCTION button, an alarm is hear. “Set I “and “timer off” blink on the control panel. Set the hour by
pressing “+ and –” button. Press again FONCTION button to confirm the hour (now the hour shines and min-
utes blink). Press “+ and -” to set the minutes, press again FONCTION button to record the minutes. Timer I
is activate.
For example : for a stop at 9am, set “9:00”.
9
Model RCO 1505 E
Rated voltage 230 V – 50 Hz
Power consumption maxi 1500 W
Notice RCO 1505 E 16/05/06 12:13 Page 9