S P E C I F I C AT I O N S
S P E C I F I C AT I O N S
Model
HU 50 EC
Voltage
230 V – 50 Hz
Power
130 W
Class II
U S I N G
U S I N G
Place the heater on a flat and dry surface and plug in it.
The best working environment for the humidifier is : temperature between 5°C and 40°C and moisture
less than 80 % HR.
Soak the descaling cartridge 15 minutes before the first use.
For the first use, let the appliance half an hour in the room before using so that the moisture sensor is
completely efficient.
Clean the water tank as well as the water flume before first use and after no use for long time.
This product is equipped with a descaling cartridge which has to be cleaned every two months or
when scale appears on the cartridge.
FILLING
- Take out the mist spray mouth and then take out the water tank from the base.
- Unscrew the water tank cap located under the tank.
- Fill the tank with water (water temperature should be less than 40°C). Screw tightly the tank cap and
replace the water tank on the base. Replace the mist spray mouth. Plug the appliance.
STARTING
- Press M/A button, working light indicator lights on.
- LCD display shows the ambient moisture rate.
Press again M/A button to switch off the appliance.
IONIZER SETTING :
- Press Ions button, corresponding indicator lights on.
- By generating negative ions, the ioniser function allows to restore air electric balance and gives a
well-being sensation.
- Press again Ions button to stop ionizer function. Indicator goes out.
STEAM FLOW SETTING :
- When the product starts working, high steam flow is defaulted.
- Press Débit button to change the steam flow to middle II, or to minimum steam flow I.
9
notice_hu50:notice_hu60.1_et 13/05/08 10:13 Page 9
