TIMER
To program an automatic start of the appliance, start it, select the required mode, fan speed and temperature
and stop it.
- Press PROG on the control panel until the required time appears on the control panel (from 1 to 24 hour).
- With the remote control, press PROG, the icon
flashes on the screen. Use f touches to set the required
time.
To program an automatic stop of the appliance:
- Press PROG on the control panel until the required time appears on the control panel (from 1 to 24 hour).
- With the remote control, press PROG, the icon
flashes on the screen. Use f touches to set the required
time.
AIR FLOW DIRECTION
• Vertical and horizontal louvers have to be manually adjusted.
WARNING !
• To prolong the life of the compressor, after switching off the unit, wait for 3 minutes minimum before
plugging it again. The unit has a three minute compressor delay protection circuit.
• Your unit must always be used in an upright position because it contains a cooling agent.
19
notice AC105.1ETP 5/12/06 17:36 Page 19
