29
ALPA 12 FPS and silex instruction manual REL-5.11 - copyright alpa 2019
shutter prio - config
ENTER the configuration level by pressing the turn-wheel. All the
menu levels are organized in circles. So by pressing [k4] the STEPS
page will appear.
EXIT the configuration level by pressing the turn-wheel. Navigate
within the configuration level as usual and flip the menu pages by
pressing [k3] and [k4]. All the menu levels are organized in circles. So
by pressing [k4] the SYNC page will show up.
press
The shutter priority controls the behavior of the internal and external
shutters and offers three options:. The mode becomes active after
leaving this menu. The mode is indicated as LS, FPS or VID in the
main exposure screen (see corresponding graphic on the right).
EXTERN LS (LS): This is the base mode. for both the ALPA 12 FPS
and Silex Mk II. If a lens with electronic leaf shutter is attached the FPS
will use this shutter down to the fastest shutter time and then switch
to the internal focal plane shutter enhancing the range to 1/4000s.
The ALPA Silex Mk II displays either “No Shutter” or EXTERN LS.
INTERN FPS (FPS): This mode applies only to the ALPA 12 FPS. In
this setting the external leaf shutter is deactivated and only the inter-
nal focal plane shutter is active. The aperture of the lens is controlled
electronically as usual.
VIDEO (VID): In this operation mode all shutters stay open and the
aperture is stopped down for video recording purpose. If you intend
to take a picture by temporarily leaving the digital back’s video mode
the initial setting of open shutters is restored again.
turn
Содержание 12 FPS
Страница 1: ...ALPA 12 FPs ALPA Silex Mk II instruction manual REL 5 11 15 OCTOBER 2019 ...
Страница 2: ...2 ALPA 12 FPS and silex instruction manual REL 5 11 copyright alpa 2019 ...
Страница 42: ...42 ALPA 12 FPS and silex instruction manual REL 5 11 copyright alpa 2019 EMc conformity ...
Страница 44: ...fps alpa camera Silex alpa camera online since 1996 ...