ALPA 12 FPS, Инструкция по эксплуатации

Страница: 19 / 44

19
ALPA 12 FPS and silex instruction manual REL-5.11 - copyright alpa 2019
<?xml version="1.0" encoding="UTF-8"?>
<ProgramSequence version="100" Name="Multi 2x">
<Action delayTimeUSEC="200">SETSYNCHLEMO</Action>
<Action delayTimeUSEC="50000">CLEARSYNCHLEMO</Action>
<Action delayTimeUSEC="200">SETSYNCHLEMO</Action>
<Action delayTimeUSEC="100">OpenIShutter</Action>
<Action delayTimeUSEC="5000">RunDelay</Action>
<Action delayTimeUSEC="100">1VSetFlash</Action>
<Action delayTimeUSEC="100">1VClrFlash</Action>
<Action delayTimeUSEC="100">CloseIShutter</Action>
<Action delayTimeUSEC="100">OpenIShutter</Action>
<Action delayTimeUSEC="5000">RunDelay</Action>
<Action delayTimeUSEC="100">1VSetFlash</Action>
<Action delayTimeUSEC="100">1VClrFlash</Action>
<Action delayTimeUSEC="100">CloseIShutter</Action>
<Action delayTimeUSEC="100">CLEARSYNCHLEMO</Action>
</ProgramSequence>
This mode allows multiple exposures with a high repeat accuracy. The XML files can consist of as many shutter
cycles as needed. Timing is determined in microseconds. Please store the file with an .fps ending and UTF-8
encoded.
A combination with multiple flash is possible (within a complete shutter cycle). Please mind the fastest recycling times
of your flash devices. The program can be used with all exposure times but the fastest flash sync time for normal
operation is 1/125 sec. Please use a “RunDelay” of 5000 microseconds before firing the flash. The sample fires the
shutter twice (one right after the other, delays can be timed with the “RunDelay” command).
MES:multiple exposure sequence
XML