AL-WPC8 -
programmable control panel
15
4.2.3
Action list
Action list shows all the set actions. An available action must be added to the list. The
action list is as the picture below:
4.2.4
Event setting
Event setting includes RS232, IR, I/O, Relay, Delay, Compare, LED, Page, Loop and
Toggle setting. Before set events, an action must be added first. The following
introduction will show you the setting of each event:
➢
RS232 Setting
This item is used for setting the parameters of the programmable control panel’s serial
ports. Click “RS232”, it will show as below:
Send
Type
Send
Port
Delete a
selected action.
Refresh, delete all the
actions that with no event.
Delete all actions.
