ALNOR
®
ventilation systems
is a legally protected trademark and technical patent. All rights reserved.
18
w
w
w
.al
nor
.c
om.
pl
User Manual
HDE
the heating coil and reduce heat exchange capacity which could lead to overheating
•
the heater should be installed so that the RESET button is easily available
•
the heater should be installed to prevent direct touching of the heating components
•
installing the heater in a different way than indicated in the manual, operating the device outside the
installation or own attempts to repair the heater result in loss of warranty.
4. Markings
Each HDE circular duct electric heater is fitted with a nameplate. Fig. 5 shows an example view of the
nameplate.
Fig. 5 Example HDE circular duct electric heater nameplate
Each HDE type circular duct electric heater has external marking in form of self-adhesive stickers placed on the
casing and connection box. Marking is formed by information, warning and instruction stickers. Fig. 6 below
presents warning markings placed on HDE type circular duct electric heaters.
Fig. 6 Warning signs
Fig. 7 and Fig. 8 below present markings placed on HDE type circular duct electric heaters.
Fig. 7 “Reset” information sign
Fig. 8 Air flow direction indication
Alnor Systemy Wentylacji Sp. z o.o.
Aleja Krakowska 10,
05-552 Wola Mrokowska, POLSKA
Nagrzewnica elektryczna / Electric heater
HDE-100-0.3
Wymiar / Dimension:
100 mm
Napięcie znamianowe / Power supply:
230V 50Hz
Prąd znamianowy / Rated current:
1.3A
Moc znamianowa / Rated power:
300W
Kod / Code:
