Almax Air Patrol 90L Скачать руководство пользователя страница 2

IMPORTANT SAFETY INSTRUCTION

1.  Make sure the power supply is 230V 50Hz AC. The appropriate power 

switch should be grounded.

2. 

Please ensure equipment is in good condition and no oil leakage during 

transportation. The machine 

must be transported upright

 and not tilted 

more than 45º during transportation or operation. 

The machine should 

be standing upright for at least 2 hours before use if it has been 

tilted.

3.  Do not pull the power cord out to stop dehumidifier working.

4. 

Do not put fingers or sticks into the dehumidifier.

5. 

It is dangerous to climb or stand on the machine and children should not 

touch the dehumidifier.

PRODUCT INSTALLATION & PRECAUATIONS

1. 

Environmental Requirements: 

Indoor use only 

Designed for ambient temperatures between 5 to 38°C.

 

At low temperatures the device will start automatically defrosting and 

the Automatic Defrost will be shown on display panel. During this phase 

cooling fan will continue to work but compressor will switch off.

 

Avoid use of machine in environment of strong explosives, flammable 

substances, and areas with a lot of dust.

2.  There should be no obstacles within 600mm of the machine.
3.  Check that dehumidifier is in level position.

4. 

When machine is not being used, fit the supplied dust cover to prevent 

dust and overspray entering machine.

Содержание Air Patrol 90L









Отзывы: