ALMAC BiBi 850-BL, Руководство по эксплуатации и обслуживанию

Страница: 57 / 127

BIBI 850-BL Use and maintenance manual Rev.00
56
4.1.5 Combustion engine starting
To start the combustion engine and the hydraulic pumps, use the key on the ground controls
( 17 ). Before starting, perform the inspections described in sect. 2.6- Inspections before use.
The key-switch functions are:
 (CENTRAL): Machine off-electrical system not powered
 (RIGHT): The platform's entire electrical system starts, including the mobile pushbutton
panel in the basket. The ground controls are excluded.
 (LEFT): The platform's entire electrical system starts. The ground controls are enabled and
the basket pushbutton panel is automatically disabled .
This is followed by a check-control of the indicator lights of the safety system, which flash as
described below:
- Indicator light (2): Maximum inclination reached
- Indicator light (5): Basket overloaded
If one or more of the indicators fails to flash, it means that the relative light bulb must be
changed.
Once the check-control cycle has terminated, the engine can be started by pressing the related
lever (
5
).
Before climbing in the basket:
1. Remove the key from the ground control panel and take it with you:
2. Make sure that the fuel supply lever is in the ON position (see figure to the side)
3.
FUEL VALVE LEVER
ON