Allworx POWERFLEX G2426, Быстрая установка и настройка, Страница: 9 / 20

POWERFLEX G2426 Managed GbE PoE Switch
Quick Installation and Initial Configuration Guide
Page 4 Toll Free 1-866- ALLWORX • 585 -421- 3850
www.allworx.com
Version: A Revised: August 16, 2017
When PoE Mode LED Lit
LED Color State Description
RJ45
Ports
Green On The port is enabled and supplying power to connected
device.
Amber On An abnormal state, such as overload status, has been
detected in the switch.
-- Off
The port has no active network cable connected, or it is
not connected a PoE PD device. Otherwise, the port may
have been disabled through the switch user interface.
Mode/Reset Button
By pressing the Mode/Reset Button for certain period of time, users can
perform the following tasks.
•
Change Port Status LED Mode
to read the port status correctly in the two different modes
(Link/Act/Speed mode or PoE mode).
•
Reset the Switch
to reboot and get the switch back to the previous configuration
settings saved.
•
Restore the Switch to Factory Defaults
to restore the original factory default settings back to the switch.
Note
:
According to the table below, users can easily judge which task is being
performed by reading the LED behaviors while pressing the Mode/Reset
button.
Once the LED behaviors are correctly displayed, users may
just release the button.