Phone Guide – 9202E
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2012 Allworx Corp, a Windstream company. All rights reserved. All other names may be trademarks or registered trademarks of their respective
owners.
Revised: May 30, 2012
Page 19
10
Regulatory Notices
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. There is no guarantee, however, that interference will not occur in a particular
installation. If this equipment causes harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: "How to Identify and Resolve Radio-TV
Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington D.C.
20402.
Changes and Modification not expressly approved by the manufacturer or registrant of this equipment can void
your authority to operate this equipment under Federal Communications Commissions rules.
The optional wall mount switching Power Supply has the following specifications: Input voltage is 100-240VAC,
50/60Hz 450mA. Output voltage is 24VDC @ 400mA. UL listed. Output connector size is 5.5 mm x 2.5 mm
(inner diameter) with center positive.
This product adheres to the IEEE 802.3af standard for Power over Ethernet (PoE).
This equipment is Hearing Aid Compatible (HAC).
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set
out in the Radio Interference Regulations of the Canadian Department of Communications.
Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicables aux
appareils numeriques de la class B prescrites dans le Reglement sur le brouillage radioelectrique edicte par le
ministere des Communications du Canada.
Warning:
Use only with
:
A Power over Ethernet (PoE) supply - This product adheres to the IEEE 802.3af standard for Power over
Ethernet (PoE).
or:
An Allworx-approved Limited Power Source, 24 VDC, 400 mA - The optional wall mount switching Power
Supply has the following specifications: Input voltage is 100-240VAC, 50/60Hz 450mA. Output voltage is
24VDC @ 400mA. UL listed Limited Power Source. Output connector size is 5.5 mm x 2.5 mm (inner diameter)
x 9.5 mm with center positive.
Do not
connect to an analog or ISDN phone line.
Caution: The earpiece region on the handset can attract and retain small objects.
Содержание 9292E
Страница 1: ...Allworx Phone Guide 9202E...
