AWU50G-US User’s Manual
(WT-mU-MTRa01/AWM503g-WT)
Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.cn
Appendix B: Important Notices
The RF antenna cable assembly used for this product is designed that no antenna other than
that furnished by the responsible party shall be used with the device. The use of a permanently
attached antenna. The maximum peak Gain of this antenna is only 2dBi(Frequency Range
2.4GHz-2.5GHz, Length=12cm).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device is intended only for OEM integrators under the
following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna
and users,and The transmitter module may not be co-located with any other
transmitter or antenna.As long as 2 conditions above are met, further transmitter test
will not be required. However,the OEM integrator is still responsible for testing their
end-product for any additional compliance requirements required with this module
installed (for example, digital device emissions, PC peripheral requirements, etc.).
