
9
1.2.2.2 VoIP/Line Configure/ Line Setting
/
VoIP Setup
/
Line Configure
/
Line Setting/
This page will setup the phone line information each port.
a.
Port
: display the port number, e.g. 1 or 2.
b.
Interface
: Telephone interface type:
FXO: for connect to telephone line or PBX extension line.
FXS: for connect to regulate phone set
a.
Name
: Line name for this port. This will send and display on the remote
side during VoIP call
b.
Line number
: Telephone number assigned to this line.
c.
TxGain
: Transmitter Gain. This will adjust the speaker volume of local
phone set. The adjust range is from +3 to -13dB. Higher value will cause
louder sound come from local phone set.
d.
RxGain
: Receiver Gain. This will adjust the microphone volume of local
phone set. The adjust range is from -3 to +13dB. Higher value will increase
amplifier the sound get from local phone set.
e.
Inbound
: Enable or disable the VoIP call to Internet. Disable the inbound
option will not allow any call made from phone set to Internet.
f.
Outbound
: Enable or disable the VoIP call from Internet. Disable the
Outbound option will not allow any call made from Internet to phone set.
g.
Hotline
: When Enable, it will allow you to make a VoIP call without Press
any number. That mean it will direct call out by VoIP when you off hook the
phone of this line.
For example, if you want line 1 to become a hot line for VoIP call, every time
when you off hook the phone connected to the line 1, it will directly call to
another VoIP gateway location at 168.56.09.22 and dial 601. You can enable the
line 1 as hot line, and add a routing rule on the routing table on
/VoIP
Setup/Routing Setup/VoIP Call Out/
to assign the
AREA CODE
to
hl1
to