![Allview 43ePlay6100-F Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/allview/43eplay6100-f/43eplay6100-f_user-manual_2904386006.webp)
6
Remove the stand before installing the TV on a wall mount by performing the stand attachment in
reverse.
If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an
authorized wall mount and contact the local retailer or qualified personnel. Otherwise it is not
covered by the warranty.
Do not over tighten the screws as this may cause damage to the TV and void your warranty.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions.
Use the screws and wall mounts that meet the following specifications. Any damages or injuries buy
misuse or using an improper accessory are not covered by the warranty.
Model Size: 43”
Top
Down
Screw
Diameter(mm) „E”
M6
M6
Depth(mm)
„D”
Max
25
15
Min
13
6
Quantity
2
2
A*B*C
200*200*200
Notes:
1.The pictures are for reference only.
2.For the TV sets with terminals towards the wall, in order to leave enough space to use the
terminals, a gasket is needed together with each screw to fix the wall mount. It is a small hollow
pillar whose internal diameter is 8mm, external diameter is 18mm and height is ≥30 mm.
Precautions for using Remote Control
Use the remote control by pointing it towards the remote sensor. The items between the remote
control and the remote sensor will interfere with its normal operation.
Do not shake violently the remote control. Also, do not splash liquid on the remote control, and do
not put the remote control in high humidity places.
Do not place remote control under direct sunlight. It will cause deformation of the unit by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not work.
If so please change the lighting or the TV's position, or operate the remote control closer to the
remote sensor.
Precautions for using battery
Improper use of the battery will cause leakage. So please follow the methods below and use
carefully.
Please note the batteries' polarity, to avoid short circuit.
When the battery's voltage is insufficient and affects the use range, you should replace it with a new
battery. Remove the batteries from the remote control unit if you do not intend to use it for a long
time.
Do not use different types of batteries (for example, Manganese and Alkaline batteries) together.
Do not put the battery into fire and charge or decompose the battery.
Please dispose batteries abiding by relevant environmental protection regulation.
WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
Before Bluetooth searching, please make sure you have activated
the pairing mode of the
external Bluetooth devices. For the remote control you can press the
and HOME buttons
together to open its pairing mode. For other Bluetooth devices,
please read their own
instruction manuals for opening the pairing mode.