3
Installation Instructions
CAUTION!
Danger of electrocution. Even when the device
is turned off, it is possible to have voltage across its clamps.
CAUTION!
Do not connect the Device to appliances
exceeding the given max load!
CAUTION!
Before beginning the installation please read
the accompanying documentation carefully and completely.
Failure to follow recommended procedures could lead to
malfunction, danger to your life or violation of the law. Allter-
co Robotics is not responsible for any loss or damage in case
of incorrect installation or operation of this device.
CAUTION!
Use the Device only with power grid and
appliances which comply with all applicable regulations.
Short circuit in the power grid or any appliance connected
to the Device may damage it.
RECOMMENDATION:
The Device may be connected to
and may control electric circuits and appliances only if they
comply with the respective standards and safety norms.
Factory Reset
You can return your Shelly Plug to its Factory Settings by
pressing and holding the Button for 10 seconds. Upon suc-
cessful factory reset Shelly’s WiFi LED will flash Red/Blue.
