All
SportSystems, Inc.
©
2019.
PROJECTION SCREEN INSTALLATION
Step 16 - Install SideRite™ tension kit (optional upgrade)
Note: The SideRite™ tension kit comes standard with BlackOut™ Wrapper upgrade. When installed
your screen will hang flatter and smoother than the standard method of hanging.
(1) On each side of the
enclosure wrap the SideRite™
cabling around the upper and
lower depth poles.
(2) Cable should be positioned
directly against and in front of
the tee pole from which the
screen will be hung.
(3) Open turn turnbuckle as fas
as possible without coming
apart. Attach hook end of the
turnbuckle to the other end of
the cable.
(4) Cables are shipped longer
than typically is needed if there
is too much slack in the cable,
loosen wire clip nuts on one
end of the cable. Pull slack out
of the cable and retighen wire
clips. Use cable ties to hold any
extra cabling in place.
(5) Tighten the cable by twisting
the turnbuckle causing the
cable to shorten. It should
have good tension.
Page 25 of 47
Rev June 6, 2019
