Step 3 - Install Chain Pockets
Chain Pockets are used to keep netting in place. They are black sleves with velcro on either side.
You will recieve 4 ea pockets, 1 for each side and two for the width of the enclosure.
● Lay pockets out flat along the entire preimeter of the netting. Place excess netting inside the
pocket.
● Place the chain inside the pockets. Chain should be long enough to run the entire bottom
edge of the netting, along both sides as well as the entire width.
● Pull down on the netting to provide as much tension on the net as possible while bringing each
edge of the pocket up on either side of the netting and attach the velcro edges of the pocket
through the netting. Pocket should remain in contact with the floor.
Page 10 of 15
Rev 3/1/2018
