AllPondSolutions 1000EF, Инструкция по эксплуатации

Страница: 5 / 32

TROUBLESHOOTING
No filter operation / water flow
Always ensure the power has been turned on.
Check that your impeller and shaft are seated correctly and not damaged
in any way.
Ensure the impeller is free of any type of blockage and can rotate freely
inside the motor head.
3
2
1
Self priming and air pocket problems
Ensure you have set up the filter on your tank with all of the pipes
connecting straight from the top of the tank directly to your filter without
having any kinks and as little bends as possible.
Check that you have connected the hose connector valve correctly to the
unit by fully pushing down the lever.
All of your entrance pipework must have its connections beneath water
level to ensure that no air bubbles are able to enter the system.
If you have purchased extra filter media on top of what is supplied with the
unit be careful not to overfill the unit as this can affect its priming and
filtering capabilities.
If you needed to press the blue button more than once when first priming
the filter we suggest that you should prime the filter from scratch again
following the above tips. The most important thing is that you are not
letting any air into your filter system as this will affect the priming of the
filter as well as the long term operation of your filter.
2
1
3
4
5
Noisy operation
Check that your impeller and shaft are seated correctly and not damaged
in any way.
Ensure the impeller is free of any type of blockage and can rotate freely
inside the motor head.
Air could be trapped inside the filter – please resolve by following the
‘Self priming and air pocket problems’ troubleshooting section.
3
2
1
Inhibited water flow
Ensure that your hoses have been correctly joined together as per the
‘parts list’.
Check your hoses for waste build up as blockages will slow your flow rate.
Your filter media may be blocked / clogged and washing this through when
completing a water change will allow better water flow.
3
2
1