Alloy MMC1000xx, Руководство пользователя

Страница: 50 / 50

MMC1000xx User Manual
Alloy Computer Products Pty Ltd Copyright ©2011
Standard Technical Specification
Standard Network Connections
Twisted-Pair Port Interface

Connector Shielded/Unshielded RJ-45, 8-pin jack

Impedance 100 Ohms nominal

Signal Level Output (differential) 0.95 to 1.05V (100Base-TX)

Signal Level Input 350mV minimum (100Base-TX)

Supported Link Length 100m

Cable Type
(10/100/1000Mbps segments)
Category 5e UTP(100M)
Category 6 UTP(100M)
Multi-mode Fibre Optic Port Interface

Connector SC, LC

Wavelength 850nm

RX Input Sensitivity -31 dBm maximum

Output Power
-14 dBm to -23.5 dBm (50/125
µ
m )
-14 dBm to -20 dBm (62.5/125
µ
m)

Supported Link Length up to 220m/550m full duplex

Cable Type 50/125, 62.5/125
Single-mode Fibre Optic Port Interface

Connector
SC

Wavelength 1310nm

RX Input Sensitivity -31dBm maximum

Output Power
-8 dBm to -15 dBm (9/125
µ
m)

Supported Link Length Standard supports 10/30/50Km in full
duplex mode

Cable Type
9/125μm F/O (recommended)
Note: Any specification is subject to change without notice.