Alloy J-Style, Руководство по сборке

Страница: 17 / 26

P+JAssem Version 1.1 13 1 December 2017
OVERTIGHTEN!.
4.9. Make Connections
All wire connections are done using snap together connectors. While we have had no issues with these
connectors, if you prefer a more traditional connection, you can solder the wires together.
• Seat the control plate or pickguard down onto the body and make sure that all the wires are safely into
the cavities, rather than trapped under the plate/pickguard.
• Start screwing in the hold down screws for the pikguard/control plate. Don’t tighten them all the way
until you have all started and you are confident that the wires are not being pinched by the plate/guard.
• Tighten all screws down. Done!
4.10. Neck Fine Alignment
At this point, the major components are assembled and the overall alignment can be completed.
• String the high G and low E strings. They don’t need to be up to pitch - rather, we will use the taut
Figure 25 Bridge aligned with Holes Figure 26 Screws partially tightened
Figure 27 Figure 28
Troubleshooting!
• You may have to rearrange the wires several times to get them into body. It can be a tight fit. Be
patient and don’t force things as this can bend components and break wires.